Overview
Mfr description
8V2240 SUPER HC V BELT
- Aramid tensile cords combine limited stretch withextraordinary strength and durability that ispound-for-pound stronger than steel
- Flex-bonded cords arestrongly secured to the body of the belt for equal loaddistribution of bending stress without cord deterioration
- Distinctive green backing provides protection with machinedsidewalls that provide even sheave groove contact forsmooth operation, less slip and reduced wear
- Patented Ethylene compound and optimized notches moldedinto the belt during manufacturing increase flexibility forcompatibility with small diameter sheaves
- Tested to transmit an average of 50% more horsepower thanstandard Super HC® Molded Notch belts
- Available on demandin Matched sets (not V80® program eligible)
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards andIP-3-3 static conductivity requirements
- REACH and RoHS 2compliant.
Specifications
- Belt CategoryNarrow Series - Inch
- Section8V
- Number Of Strands1
- Nominal Outside Length224 in
- Cogged/SmoothSmooth
- Top Width Per Strand1 in
- Belt StyleSUPER HC®
- Reinforcing Cord MaterialPolyester
- Resistance FeaturesOil Resistant
- Overall Height0.8750 in
- Top Width1 in
- Effective Length224 in / 5690 mm
- ColorBlack
- MaterialPolychloroprene (Neoprene)
- Country of OriginMX
- Standards MetRMA
- Manufacturer Upc Number072053016673
- UPC_NO072053016673
- Weight8.48 lbs
- Manufacturer Catalog Number8V2240
- DescriptionCombines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it o?ers you more power and considerably reduces the space needed. This signifcantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
- Outside Circumference224.5 in / 5702 mm
- Angle40
- Belt Height7/8 in
- Belt/SlabBelt
- Belt Back SideSmooth
- Product TypeIndustrial V-Belts
- Belt InsideSmooth
- ConstructionBanded
- Cord MaterialPolyester
- Maximum Temperature+250°F / +121 °C
- Minimum Temperature-60°F / -51 °C
- Number of SidesSingle Sided
- Static ConductiveYes
- Thickness22 mm
- TrademarkSuper HC™
- UnitsetYes
- Additional DetailsWarning: Do not use Gates belts, pulleys, sprockets, hose or couplings on any aircraft propeller or motor drive systems or in-flight accessory drives. Gates products are not designed or intended for aircraft use.
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
