Specifications

• Series
  2000 - Standard
• Displacement
  9.65 in³/r
• Maximum Operating Pressure
  3000 psi
• Continuous Torque
  4027 in
• Max Rpm
  477 rpm
• Motor Port Size
  7/8–14 UNF-2B
• Motor Port Type
  Straight Thread O-Ring SAE
• Shaft Type
  Splined
• Max Operating Temperature
  180 °F
• Output Shaft Size
  1 in SAE - 6B Spline
• Maximum Flow Rate
  20 gpm
• Overall Height
  6.96 in
• Overall Length
  7.74 in
• Overall Width
  5.16 in
• Seal Type
  Standard
• Drain Connection Size
  .4375-20 Unf-2b O-ring Port Size -4
• Operation Rating Description
  Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute
• Port Orientation
  Staggered Ports
• Replacement Balance Ring
  006 Design - 8915-000 - 1 Required
• Replacement Buna Seal Kit
  006 Design - 61258-000 - 1 Required
• Replacement Drive - Sold Separately
  006 Design - 21371-004 - 1 Required
• Replacement Drive Valve
  006 Design - 8433-000 - 1 Required
• Replacement Geroler - Sold Separately
  006 Design - 21625-004 - 1 Required
• Replacement Housing Bearing Side Fnt
  006 Design - 21578-004 - 1 Required
• Replacement Long Cap Screw Cap End
  006 Design - 14384-007 - 4 Required
• Rplc Output Shaft And Bearing Kit
  006 Design - 21618-005 - 1 Required
• Replacement Pin For Balance Ring
  006 Design - 14351-000 - 2 Required
• Replacement Plate Valve
  006 Design - 22134-000 - 1 Required
• Replacement Rear Housing
  006 Design - 21564-001 - 1 Required
• Replacement Valve Sold Separately
  006 Design - 21466-000 - 1 Required
• Replacement Viton Seal Kit
  006 Design - 61263-000 - 1 Required
• Replacement Wear Place
  006 Design - 22102-000 - 1 Required
• Replacement Pin For Balancing Ring
  006 Design - 14351-000 - 2 Required
• Actual Mounting Flange
  2-Bolt Flange - Sae A - With 3-1/4 In. Pilot Dia.
• Actual Output Shaft
  Spline
• Actual Port Type
  .875-14 UNF-2B SAE O-Ring Ports - Staggered Ports
• Continuous Flow Rate
  75 L/min
• Intermittent Pressure
  260 bar
• Max Continuous Oil Viscosity
  70 Saybold universal second
• Maximum RPM-Continuous
  308 rpm
• Port Configuration
  .875-14 UNF-2B SAE O-Ring Ports - Staggered Ports
• Mounting Type
  2-Bolt Flange - 3.25 in Pilot - SAE A